How to wear Talaa
No glue on Smooth, a light adhesive edge on Glazed, and a silicone tape you cut to any shape. All easy to put on, all painless to take off.
Smooth Originals
-
1Make sure your skin is clean and dry, no oil or cream.
-
2Flip the cover inside out.
-
3Place it slightly above the bottom of the nipple.
-
4Paste in an upward motion, smoothing as you go.
-
5Press and warm with your hands to activate the grip.
Fitted tops, dresses, gym bras, and anything snug. Since there's no adhesive, the fabric helps hold them in place.
Smooth Triangles
-
1Make sure your skin is clean and dry, no oil or cream.
-
2Flip the cover inside out.
-
3Place it slightly above the bottom of the nipple, point facing up.
-
4Paste in an upward motion, smoothing as you go.
-
5Press and warm with your hands to activate the grip.
Fitted tops, dresses, gym bras and swimwear. Triangles are waterproof, so these are the ones to reach for around water.
Glazed Originals
-
1Make sure your skin is clean and dry, no oil or cream.
-
2Flip the cover inside out.
-
3Align the large non-adhesive centre with your areola.
-
4Paste in an upward motion, smoothing as you go.
-
5Press down once applied. The light adhesive edge locks in for extra hold.
Loose tops, flowy dresses, backless outfits, and anything that needs extra hold where fabric alone won't keep them in place.
Talaa Tape
-
1Cleanse and define. Start with clean, dry skin. No creams, no oils. Then pick the look you're going for.
-
2Customise and apply. Cut the tape to your length or shape, lift into position, and press for 5 seconds. Talaa's got you.
-
3Adjust and enjoy. Not quite right? Peel off gently, reapply, press again for 5 seconds. Done.
-
4Bonus, layer up. You can layer your Talaa Covers with Talaa Tape. Mix and match to fit any look.
Backless, strapless, plunging necklines, and everything in between. For the moments a bra simply doesn't work.
Taking them off
Smooth covers lift off with zero pulling or irritation. For Glazed, gently peel slowly from the edge. Both are painless.
You can put them on after dressing
Prefer to dress first? Slip Talaa covers inside your top or dress and press into place. Whatever works for you.
Grip not as strong?
Natural body oils and sweat build up over time. A quick wash brings the grip right back. Make sure your skin is clean and dry before reapplying.
Keep the protective film
Don't toss it. Place your Talaa Tape back on the film after every wear and store it in the original packaging. That's what keeps it sticky for next time.
Patch test first
Test patch before wearing for longer periods. Do not use on irritated or sunburned skin, and avoid use if you may be allergic to silicone or adhesive. Discontinue use if irritation or discomfort occurs.
Caring for your Smooth covers
No adhesive to protect, so it's simple. A quick wash after every use and they're ready to go again.
- Wash with water and hand soap after every 1-2 uses
- Pat dry with a clean towel, don't rub
- Air dry fully before storing
- Once dry, place back on the protective film or plastic dome, then inside the Talaa pouch
- Avoid harsh chemicals, alcohol-based cleaners, or washing machines
Caring for the adhesive ones
Glazed has an adhesive edge, Talaa Tape is adhesive all over. Both come down to protecting that surface.
- Peel off gently and slowly from the edge, no oils needed
- Place them straight back on the protective film after every wear
- Store in the original packaging or the Talaa pouch to protect the adhesion
- Keep oils, creams, and harsh chemicals off the adhesive side
- Glazed: wash with water and hand soap, then air dry adhesive side up
- Talaa Tape: reusable up to 5 wears with proper care
